Las Vegas mesh banners are designed for windy areas that normally tear up vinyl banners.  Because of the sheer force of the wind pushing up against a vinyl banner. Las Vegas mesh banner signs are specifically designed with little holes in the vinyl. So that to allow wind to pass through the banner, rather than up against it. This design takes tremendous pressure of the vinyl banner and extends its life. These Las Vegas banners can be made in many different sizes to meet your advertising needs.

Las Vegas mesh banner signs are very similar to vinyl banners in that they can be full color. ( meaning you can have any of the many colors on them )  They can be printed with designs and they serve to advertise your business or event. These banners can be strung between two poles or on fences and can withstand the forces of the wind. Normal vinyl banners ( even with wind slits cut on them ) face much wind pressure against the banner. So that leads to banner grommet failure ( where the banner is attached ).

How Are Las Vegas Mesh Banners Made ?

Las Vegas banners are printed with large format printers using outdoor inks that are bright and vivid in color. The banner is usually hemmed for additional strength  and then grommets are placed on the outside perimeter of the banner approximately 24 inches apart for easy hanging. If larger banners are needed that take special large format printers. Larger printers are required.

Conclusion

In Las Vegas, it is better to put a vinyl banner up against a solid surface to get the full life out of the banner. In those cases where it has to be strung out in the open, it is best to use a mesh banner because you never know when you are going to get those Las Vegas high winds. Your local Las Vegas banner printing store will have additional information on the great wind resistant mesh banners. Delivery and installation of your Vegas banners can be arranged.